Desulfurized gypsum briquetting machine pre-delivery inspect
Desulfurized gypsum briquetting machine pre-delivery inspection work
After the desulfurized gypsum briquetting machine is produced successfully, it need to be delivered to customer premises from the manufacturer. Before leaving and loading goods, every desulfurized gypsum briquetting machine need inspection and preparation work.
1, According to customers’ requirements, the desulfurized gypsum briquetting machine’s double rollers is installed, and the V-belt is adjusted. V-belt tightness requirements: By hands push the V-belt, drooping over one centimeters prevail. Adjust subsequent desulfurization gypsum briquetting machine’s two roller gap, to ensure the best gap between 0.5-1mm. The way is carry on oblique iron.
2, the whole of the desulfurized gypsum briquetting machine idle, after no abnormal, commissioning test load, and then view the ball situation, not sticky roller stripping phenomenon, if both need to use the dry material repeated pressure test on the briquette machine, to ensure the machine out of the ball in normal operation.
3, After the desulfurized gypsum briquetting machine operation is in normal operation and discharge balls normally, Â placed user’s raw material to debug, until debugging is normal.
Check preparations well of each desulfurized gypsum ball press machine, in order to ensure that each machine issued to customers is qualified products, so that every customer as soon as possible put into production, and has quality assurance, this is what we adhere to the philosophy to the effect of the operation.
